Big Pappa Frame
|
|
|
|
|
BIG PAPPA SINGLE SIDE SWINGARM FRAME
THE WRENCH has been manufacturing single side swing arms longer than anyone! We've been around them for quite a while. Let's just say you won't hear excuses about why this does not fit or that doesn't work. The bottom line is ours is the best working, most durable single side on the market.
UNIQUE FRAME FEATURES:
Billet swing arm design. Integrated and shaped battery box for full size gel battery. 4 quart contoured oil tank. Section on transmission plate for mounting the compressor of an air ride. Swing arm bearing and bolt kit.
"BUILD ON A SOLID FOUNDATION"
STANDARD MANUFACTURING SPECIFICATIONS FOR ALL FRAMES
We have the most state of the art frame jigs in the industry. They are CNC machined to exact tolerances from steel and billet aluminum and weigh approximately 800 lbs. a piece. Wrench frames are designed based on a center line to keep the tire perfectly in the center of the frame. Each fixture has a center line scribed into it's surface as well as each back bone that is jigged. These are lined up with a laser line as the frame is jigged and checked with the laser before unjigging the frame to check for movement. Each chassis is welded using the latest TIG welding technology and is fixtrue cooled over night . Wrench frames also go thru a ten step digital level process before shipping.
FRAME TUBING: 1 1/2" DOM seamless tubing with a .120" wall thickness.
BACKBONE TUBING: 1 3/4" DOM seamless tubing with a .120" wall thickness. Each backbone has a center line scribed into it to help center the rear tire perfectly in the frame.
DOWNTUBE TUBING: 1 3/4" arched DOM seamless tubing with a .120" wall thickness.
NECK TUBING: 2 1/2" DOM seamless tubing with a .375" wall thickness that is CNC machined with integrated fork stops, "clean" fork cups ready for bearing races and a seventeen digit I.D. number.
MOTOR MOUNT PLATES: 1/2" thick mild steel.
TRANSMISSION PLATE: Structurally integrated 1/2" thick mild steel CNC machined for proper transmission fitment.
AXLE BLOCKS: CNC machined from solid billet steel with axle covers and dual "POSILOCK" front and rear axle adjuster bolt holes. Machined grooves to install your choice of reflectors or dual element led lighting with hidden wiring.
AXLE: 1" diameter drilled and tapped on each end and oblong spacers for the ultimate in adjustability.
GUSSETS: The Wrench offers 8 different styles as well as any customers custom design. We often develop gussets with shop logo's to help create "market recognition."
RAKE AND STRETCH: There are 5 standard combinations, but any custom rake or stretch can be accommodated.
"BUILD ON A SOLID FOUNDATION"
|
$1,600.00
|
$1,900.00
|
|
|
$4,200.00
|
$1,750.00
|
$2,450.00
|
